Category: Applique

First, I just want to say thank you to all of you who reached out, left me comments and sent personal emails about my Grandpa. Thank you for all the thoughts and prayers, words of encouragement, and especially those of you who shared about losses of your own. It’s been overwhelming to see how the life of one man close my heart touched the hearts of so many of you, too. I appreciate your kindness and thoughtfulness more than you know!

Now, on to the fun stuff.

2 years ago I participated in a gift exchange with some friends. Our babies were turning 1 and we secretly drew names and surprised the other person with gifts (something we still do today!). I drew a little boy and was stumped about what to get him. His Mom had linked to some bean bags on etsy that she liked, but they were plain and boring to me. “I can make awesome bean bags!” I thought. So with a little creativity and a lot of patience, I made my first set:

My friends went nuts. The next thing I knew, I had orders for nearly 100 bean bags! (I briefly blogged about this last year when I started my blog.)

(my first orders!)

I decided that since my friends liked them so much, I should put them in my etsy store, because maybe others would like them too. And sure enough, instant hit.

Then etsy pulled my listings because Taggies brand has an EXTREMELY vague patent on looped ribbon. I was really angry and put the bean bags on the back burner. But my friends continued to ask for them for shower gifts, birthday gifts, and as toys for their younger or older kids.

I don’t think I could even begin to count the number of bean bags I’ve made. Sadly, out of the hundreds I’ve done, none have been for my own girls! I really need to remedy that…

These little bags have all kinds of great features. My favorite part is that they’re completely customizable. They provide tactile fun from the ribbons, and help kids learn to recognize and spell their names. And, they’re fun! Who doesn’t love a good bean bag?

The loops are big enough they can get their fingers in them, helping develop fine motor skills, but they’re not big enough to get their fingers twisted or stuck.

                          

So I figured since I can’t sell them in my store anymore, I’m sure others would like to know how to make them, too! So here’s the deal. If you PROMISE not to sell them, I’ll tell you how to do it.

Deal? I don’t want Taggies coming after me again!

For each bean bag you need:
2 pieces of fabric 5″ by 5″
a scrap piece of fabric for the applique
36″ of ribbon
filler (I’ll cover filler when I get to it in the tutorial)

Start by cutting your fabric into 5″ squares, two at a time (the back and the front of each bag). I was making the name “Abbey” so I cut five sets of squares.

You’ll need to mark on each bag where your ribbon goes. Start by making a dot in the middle (2.5″).

Then make a dot 1″ on each side from that one. You don’t have to worry about using fabric-safe marking devices because these will be cut off. I usually use a permanent marker so I can see the mark on any print fabric. Repeat on all 4 sides of each bag.

Then trace the name backwards on Heat n Bond Lite, iron to the wrong side of your coordinating fabric, and cut out.

Iron the letters to the middle of each bag. The letters I use are 3″ tall and 3″ wide.

Applique the letters to the front side of each bag. If you need help, see my applique tutorial.

Now attach the ribbons. You need 36″ of ribbon for each bag, cut into 3″ sections. I like to use 6 different styles of ribbon, but you can use 1, or 3 or 12, it’s totally up to you! I cut all of my ribbons for all the bags at once. 30″ of each style (2 ribbons of each print, 3″ of each, times 5 bags).

I personally like to lay the ribbon out before I start sewing. I try to keep any of the same color from being next to each other, and I also like to separate prints (though I had to have polka dots next to each other this time). I try to use ribbon of varying sizes, and I keep the widest ribbon in the middle. I always use them left to right and in the same order on each bag. But all this is just my personal preference!

To sew the ribbon on, choose the piece you want to start with, fold it in half with wrong sides together, and line the edge up with the edge of the bean bag. I always start on the right side of the bean bags.

Place the ribbon on the OUTSIDE of the top dot.

Then stitch over the ribbon several times using a 1/4″ seam allowance.

Pick up your second ribbon, fold in half, and CENTER it on the middle dot. Stitch on.

Get your third ribbon, and place it on the OUTSIDE of the bottom dot.

Sew to the bottom of that side, leaving 1/4″ inch at the bottom, put the needle in the down position, and turn your fabric 45 degrees so you’re ready to sew down the next side.

Repeat the ribbon-sewing process on the three remaining sides.

Take the back piece, and put right sides together.

Now we’re going to sew around the perimeter. We need to leave an opening to turn it through, so I start sewing at the TOP of the BOTTOM ribbon.

**Just like with the ribbon, I start on the right side of the bag. There’s no science to it, I just like to do them all exactly the same.

Using a 1/2″ seam allowance, I sew around all 4 sides,

until I get back to the same side I started on. I sew to the BOTTOM of the TOP ribbon. This will leave a hole exactly 2″ big to turn through.

But I like to make sure these are stitched well. So in the same seam, I turn my bag 45 degrees in the opposite direction,

sew over 2 stitches to 1/4″ seam allowance, and sew back around to my starting point.

This gives the bags a double seam to ensure good quality, and it puts 3 seams on the ribbons, making sure they don’t come out.

Since the project has corners, they need to be clipped to prevent bunching when turned the right way. I prefer to just cut the whole thing with pinking shears. Make sure you don’t cut any of your seams! I DO NOT cut the fabric at the opening.

Turn the bag through your opening (it helps to stick 1 finger in the hole, grab one of the loops from the opposite side and pull it through) and push the corners out using a pencil or chopstick. At this point I usually hit them with a hot iron to get rid of any wrinkles that might have cropped up during the sew and turning.

For filler, you can use whatever you want, really. They make pellets for dolls and things now, so if you prefer to go that route you can. I was selling these for a few dollars each, so I needed to keep my costs low. And, after all, they are bean bags! I used to use pinto beans, but The Hubs talked me into split peas later on down the road, and I prefer the smaller peas! Since these are made with real beans, you have to be careful in getting them wet. If you’re afraid of stains or messes, you might want to go with poly pellets instead of beans to prevent any sprouts from growing!

If you have a funnel, this will be easy for you. If you don’t, get a scrap of paper and make it a tube, then place in the hole.

                          

Then fill with 1/2 cup of beans (or pellets).

You don’t want the bag more than about 2/3rds full, so 1/2 cup should be all you need.

Then sew the hole closed. I use fabric that matches the bag to prevent it from being too noticeable. If I don’t have matching, I’ll use coordinating. I sew from the top of the top ribbon to the bottom of the bottom ribbon to make sure there’s no little gaps.

And that’s it! They’re quick and easy and oh-so adorable!

Now go an make a million. But remember, please don’t sell them!

Several of you expressed interest in a tutorial for the placemats I made. This was a rushed, last-minute project for me, so this is the best I can do!

First, I used an existing placemat to determine the size I wanted to use. I cut 2 pieces of each fabric to that size, as well as 2 pieces of flannel, per placemat. Using Elmer’s spray adhesive, I glued the flannel to the wrong side of each placemat piece.

To make all my pieces, I found a fork and spoon image I liked by searching Google images. I made up the knife piece (and kicked myself when I realized I had it backwards. But being under a time constraint, I dealt with my backwards knife). I traced one of our large glasses (that we don’t normally use at dinner) and a plate that’s a size smaller than our regular dinner plates (that I used to set the table). I got out one of our regular napkins, folded it in half, and traced it.

Then I made 8 sets of everything, so I had a complete table setting for each side of my placemat. I traced it all onto the paper side of Heat n Bond LITE.

Once I got it all traced, I ironed the HnB onto the wrong side of the fabric I was using for them. Napkins went on polka dots, everything else on black. Then I cut out all my pieces.

I laid all my pieces out on the placemat until I got an approximate placement for them. I removed everything but the napkin piece, took the paper backing off, and ironed it down onto the right side of the placemat piece. I then appliqued around the edge (for tips on how I applique, visit my applique tutorial).

Then I laid out the rest of my pieces, ironed them down, and appliqued them.

Repeat on both sides for each placemat.

Once all the pieces were appliqued, I placed wrong sides together, and sewed around the perimeter of the placemat, close to the edge. I made bias tape (not on the bias) and sewed it around the edges to finish them off.

Then I wrote my piece names with a fabric marker and voila! I was done!

I mailed another package today, this time it was full of things for a Disney trip! I swear, everyone’s going to Disney World but us! I mailed a Handy Manny shirt at the same time that someone bought out of my etsy store for their trip to DW this month. It must be in the water!

Anyway, I loved sewing these dresses. They’re so perfect for the occasion! I can’t wait to see pictures of the little honey’s in them! (one is a 3T, the other is a 12m)

I was even able to find ribbon with the Princesses on it!

There was also a Minnie-inspired dress for the older sister.

And finally a tote for Mom to haul around everything they might need!

I lined it with big red and white polka dots, because I couldn’t pass up using this fabric on this tote!

The name I did on Heat n Bond (not lite, the red one) and just ironed it on. Since I don’t have the ability to embroider, and the letters are too little to applique, this was a great solution! The font is called Walter and can be found here.

Hope you guys have a wonderful trip!!

I’ve been sewing up a storm around here lately! Holiday orders are flying out the door!

This week I mailed off these Christmas pjs to the sweeties who got the Mickey and Minnie costumes.

Their Mom also wanted some cute Thanksgiving shirts like she’d seen in an etsy store. I loved them so much, I made them for my own girls!

Another friend wanted some reindeer jammies for her son, too.

These sets all got a festive tag.

And still another friend (I know, my friends keep me in business ) is about to have her second baby, a little girl. She asked me for some of my super drool-absorbing bibs. She left fabrics up to me, only requesting nothing overly pink.

And in the midst of all of this, I’ve been working on a little project I’m oh so excited about!

A friend came to me a few months ago and asked me to make her kids Mickey and Minnie costumes for Halloween. Conveniently, her son is Sofie’s age and her daughter was born the month before Chloe. So my honeys got to model these adorable (if I do say so myself!) costumes.

She wanted dressy “tuxedo” Mickey, so I appliqued a vest on a black shirt to give the illusion of tuxedo top. My favorite is the bow tie!

My Mickey Mouse wears pink shoes!

I made Minnie her classic gold shoes, though since they were for an active nearly-8-month-old baby, they’re regular bootie style with non-slick soles. No heels for this little lady!

I just love the way they look together!

I know I’m their Mom, so I’m biased, but these are the most adorable little faces!

I haven’t started my own kids costumes yet, but I still have a week! Sofie’s so excited for hers to get done, though with as sweet as they look in these, Mickey and Minnie sound like good options to me!